Oh no! Where's the JavaScript?
Your Web browser does not have JavaScript enabled or does not support JavaScript. Please enable JavaScript on your Web browser to properly view this Web site, or upgrade to a Web browser that does support JavaScript.

2021 Legend Series Rules

Last updated on 2 years ago
The Saw
Tires and Wheels
Supertire 1900
Quick Slicks PN150 Edited 6/5/21
Paul Gage Tires rear
Stock Pioneer tires front.
You may true front and rear wheels and tires, and coat front tires

Firmness
XPG soft OR PGT firm

Sizes
23103xd standard diameter
22103xd smaller diameter
21103xd shortest diameter

Axles and Bushings
Must use stock bushings.
Glue in the bushings,
Remove front and rear axle slop (up and down and without modifying the chassis),
Stock axle. Suggest gluing stock spur gear to rear axle splines. Splines should be polished down if replacing with NSR gears.

Gears
Stock gears may be used or replaced with identical 33z/12z ratio.
NSR makes the required diameter gears.
Part number NSR 6033 & 6912

Flag and Lead Wires
change braid and lead wire.
Replace flag with Slot.it part numbers SICH07 wood track guide or SICH10 universal guide. You’ll need to use a longer body screw with this chassis. Amended 10/8

Motor
Stock 18 k Typhoon motor.
May glue in the motor.

Chassis
May sand minimally to create chassis rock.
May remove/omit DPR chip holder but door must be in place.

Any questions please contact Gary (The Saw) Kurt (Kurt N) or Jon (Jon T).
You can view all discussion threads in this forum.
You can start a new discussion thread in this forum.
You cannot reply in this discussion thread.
You cannot start on a poll in this forum.
You cannot upload attachments in this forum.
You cannot download attachments in this forum.